Alfatronix Charger USB 12/24-5V 3.0A double output front fit

Product number:
PV65R-DFf

Alfatronix Charger USB 12/24-5V 3.0A double output front fit

371,43  DKK

All prices are excl. VAT

Delivery:

In stock
Will be shipped in 1-2 days

PV Front Fitted Double Output USB Charger IP65

Input 12-24V DC (Range 9-32) –  Output 5V DC
Double output 3A (1.5 per socket)
Dimensions Ø47 x 49; Hole Ø30
Ruggedised electronics protected to IP65

Ideal for charging mobiles/tablets in vehicles

Apple and Android auto-detect

Input voltage9-32V DC
Output Voltage5V DC
Ampere3A
Output Power
Efficiency (%)90%
OPERATING TEMPERATURE-25° - 55°
STORAGE TEMPERATURE-25° - 100°
Humidity (%)Max 95% non-condensing
IP classIP65
Output Connector2 x USB Type A
ON diodeBlue LED
CertificatesEN50498, EN61373, EN50155, EN50121-3-2, ISO7637-2, AES5, R118
StandardsCE and E
IsolationNo
Weight (kg)0.043
Length mm0.00
Width mm0.00
Height mm0.00

More about the product

PV65-USB Power Supplies with added protection to IP65 (liquid, dust and vibration protection)

The PV65R USB chargers offer all the performance benefits and features of the PVPro range with additional protection provided to the electronic circuit of the unit. A durable polyurethane compound encompasses the electronic components offering comprehensive protection against dust and liquid ingress to IP65. This product offers a good solution where tampering might be an issue or in dirty or more challenging environments. Although the nature of the USB connector itself can always be willfully broken or damaged and will still corrode if repeatedly exposed to liquid ingress, all electronics in these units are protected to IP65.

The range               

The range complement the very successful PVPro products, offering both single and double outputs and rear fit as well as front fitting options which allow the unit to be replaced quickly and easily should this be required. Automatic short circuit protection is also included, so in the event of tampering or compromise, the unit will automatically shut down, and then restart once the fault has been removed. 

Installation of PV65 

All units can be installed on both 12V DC or 24V DC vehicles without adjustment. Units can be installed directly into bulkheads, vehicle walls with the pod USB-WPOD, into seat fittings and underneath seats using the mounting pod USB-POD. They can also be fitted onto table tops using the horizontal surface mounting pod USB-TPOD.

Approvals and manufacture

The range has been designed to meet the rigorous standards required for on board commercial vehicle applications including EN50498, ISO7637-2, EN61373 and EN50155 and is both CE and E marked (Reg10). The casings are made from V0 rated (self-extinguishing) high impact polycarbonate and the electronic assembly is predominantly by computer-controlled SMT for maximum durability.

Alfatronix Warranty

The PV65R range of chargers is manufactured using rugged components to provide years of service in demanding commercial environments and is covered by a three-year return to base guarantee.